徹底した品質管理と複数の認証により確認されたDSE,Inc.の技術力
※ If the entire table is not visible, you can scroll the table left and right to check the entire table.
Material | ABS | AC | POLYCARBONATE (Lexen 943AR/123R) |
POLYESTER | NYLON |
---|---|---|---|---|---|
Outdoor Use | ▲ | ★★★ | ★★★ | ★★★★★ | ● |
Indoor Use | ★★★ | ★★★★★ | ★★★★★ | ★★★★★ | ★★★★★ |
Robustness | ★ | ★★★ | ★★★★ | ★★★★ | ★★★ |
Lightweight | ★★★★★ | ★★★★★ | ★★★★★ | ★★★★★ | ★★★★★ |
Impact Resistance | ★★★ | ★★★★★ | ★★★★★ | ★★★★★ | ★★★ |
Aloohols | ★★★ | N | ★★★ | ★★★ | ★★★ |
Ketones | ▲ | ▲ | ▲ | ▲ | N |
Esters | ● | ● | ● | ▲ | N |
Alkalis | ★ | ● | ▲ | ▲ | N |
Oils (unsaturated aliphatie mixtures) | ★★★ | ● | N | ★★★★★ | N |
Waxes (heavyoils) | ★★★ | ★★★ | N | ★★★ | N |
Brake fuld | ▲ | ▲ | N | ★★★★★ | N |
Hot water (80℃ or Higher) | ★★★ | ★★★ | N | ★★★ | N |
★★★★★ (Very Good : unaffected is its performance with regard to time, temperature and stress) ★★★ (Good : acceptable in normal exposure, but higher temperatures may result in major loss of properties) ● (Fair : only for short exposures at lower temperatures or when loss of mechanical properties is not critical) ▲ (Poor : not recommended) N (not tested) |