经过严格的质量管理和多种认证确认的DSE,Inc.的技术力量
LUPOLX TE 5016F
✔ 장점
✔ 물성표
※ If the entire table is not visible, you can scroll the table left and right to check the entire table.
Division | Unit | LUPOX TE-5016F | |
---|---|---|---|
CylinderTemperature | Rear | ℃ | 240~260 |
Center | ℃ | 250~270 | |
Front | ℃ | 250~270 | |
Nozzle Temperature | ℃ | 260~280 | |
Melt Temperature | ℃ | 260~280 | |
Mold Temperature | ℃ | 40~80 | |
InjectionPressure | First | kg/㎠ | 500~800 |
Second | kg/㎠ | 450~650 | |
Back | kg/㎠ | 0~40 | |
Screw Speed | rpm | 70~100 |
※ If the entire table is not visible, you can scroll the table left and right to check the entire table.
Typical Properties | Unit | Standard | LUPOX TE-5016F | |
---|---|---|---|---|
Specific Gravity | - | ASTM D792 | 1.27 | |
Mold Shrinkage | cm/cm x 10-3 | LG Chem. | 7~10 | |
Tensile Strength | kg/㎠ | ASTM D 638 | 600 | |
Elongation, break | % | ASTM D 638 | 60 | |
Flexural Strength | kg/㎠ | ASTM D 790 | 900 | |
Flexural Modulus | kg/㎠ | ASTM D 790 | 24,500 | |
IzodNotch | 23℃ | kg.cm/cm | ASTM D 256 | 73.5 |
-30℃ | 22 | |||
HDT (18.6kg/cm2) | ℃ | ASTM D 648 | 98 | |
MI (250℃, 5kg) | g/10min | ASTM D 1238 | 30 | |
Flammability | UL 94 | V-0(1/8”) |